After examining the potential uses for a property that are both legal, physically possible, and financially feasible, an appraiser will rank them based on risk adjusted returns. In many cases, the options with the highest potential for returns will ultimately be too risky for investors, so appraisers often apply a discount rate based on risk to adjust a property’s IRR.
The Four Highest and Best Use Categories
After examining a property based on the four tests mentioned above, an appraiser will be able to determine which of the four general HBU categories it fits into. They include:
Highest and Best Use: The property is currently maximizing value for owners/investors, and perhaps the surrounding community as well. Nothing substantial can be done to improve its value.
Under improvement: The property may not be currently at its highest and best use, but it provides a reasonable return to investors and a property demolition would not likely provide a worthwhile ROI. However, a renovation or expansion might, depending on the circ*mstances.
Overuse: The property currently violates zoning or building regulations, for example, a building could be too tall in a zone that only allows buildings up to a certain height, structures may go too close to property lines, or it could be a commercial property in a purely residentially-zoned area. If the building is an overuse based on new zoning regulations that were put in place after it was built, it may be ‘grandfathered in.’ Otherwise, the owner may have to pay a fee or adjust the building to conform to municipal standards.
Non- Highest and Best Use: The property is clearly not being put to its highest and best use. For example, a property with large, 2-story apartment building in a high-demand area that permits 20-story condos. The current land improvements should be demolished to make way for new development.
Applying Highest and Best Use to Vacant Land or New Construction
The principal of highest and best use can be used for either vacant land or land with existing improvements. For example, if we were to examine a vacant lot and determine which type of property would generate the most profit at sale, we could analyze the profit margins for various classes of commercial real estate (as found in the table below). However, this does not take into account legal permissibility, market demand or risk ( for example, hospitality properties are generally far riskier than multifamily apartments). All other things being equal, however, if the example below were true, hospitality would be the highest and best use of the property, followed by residential, commercial, and retail.
Applying Highest and Best Use to Property With Existing Structures
To demonstrate how highest and best use can be used for a property with an existing structure, let’s say that an older building in a mid-sized metropolitan area is currently being used as an apartment building. While rents have not greatly increased, the city has seen a massive influx of tourism in recent years, and there’s a substantial demand for hospitality properties. The building is $15,000 sq. ft. with a vacant land value of $15/sq. ft., bringing the vacant land value to $225,000. As apartments, the building generates $20/sq. ft. of rent, with a vacancy rate of 3%, and operating costs are $60,000/year. If area cap rates are about 8%, we would estimate the building’s current value at $2,875,000.
In this example, let’s say that hotel properties rent for approximately $35/sq. ft. Since we already know that it’s an attractive market for hospitality properties in the area, an investor/developer may wish to invest into renovating the property into a hotel, which they could then rent to a hotel chain and, within a few years, sell the property for a profit. Converting the property will cost $1 million, and will take approximately 1 year, during which there will be no income from the property. Operating costs are $4/sq. ft. and increase by $0.50/sq. ft. each year.
Assuming we have a regional or national hotel chain willing to sign a 10-year lease with rent that increases 3% annually, we will have zero vacancy past the first year. In the table below, will look at the property over a 6-year period to assess it’s potential profitability. If we also assume that the average area cap rate remains the same, approximately 8%, we can take Year 6 NOI to determine a potential resale price of $6,131,250.
This example is done unlevered, and assuming that the investor fully owns the property and has the cash to upgrade it themselves, and wants to do so, which is unlikely. If we were to add debt in, for instance, a construction loan in Year 1 and a refinance in Year 2, it would significantly decrease the upfront capital improvement costs, but would significantly decrease NOI. However, it would still likely increase IRR significantly.
Questions? Fill out the form below to speak with a commercial real estate loan specialist.
Related Questions
What is the definition of highest and best use in commercial real estate?
In commercial real estate appraisal and valuation, the highest and best use of a property is the use of a property that will bring the highest value to stakeholders. When an appraiser attempts to determine the highest and best use of a property, they must not only examine its current use, but must also look into potential alternative uses. In regards to commercial real estate investing, the highest and best use typically means the use with the highest risk-adjusted returns. However, when determining highest and best use, appraisers may also consider other factors, such as community development goals, as well as specific benefits to potential owners, especially in the case of owner-occupied real estate.
The principal of highest and best use can be used for either vacant land or land with existing improvements. For example, if we were to examine a vacant lot and determine which type of property would generate the most profit at sale, we could analyze the profit margins for various classes of commercial real estate (as found in the table below). However, this does not take into account legal permissibility, market demand or risk ( for example, hospitality properties are generally far riskier than multifamily apartments). All other things being equal, however, if the example below were true, hospitality would be the highest and best use of the property, followed by residential, commercial, and retail.
Sources:
https://CommercialRealEstate.Loans
/commercial-real-estate-glossary/appraisals
/commercial-real-estate-glossary/highest-and-best-useWhat are the criteria for determining highest and best use in commercial real estate?
The criteria for determining highest and best use in commercial real estate is based on the Principle of Highest and Best Use. This principle states that the use of a property that will bring the highest value to stakeholders should be determined. To determine the highest and best use of a property, an appraiser must examine its current use, as well as potential alternative uses. The appraiser must also consider the risk-adjusted returns of the potential uses, as well as other factors such as community development goals and benefits to potential owners. The four tests to determine highest and best use are maximally productive, legally permissible, physically possible, and financially feasible.
How does highest and best use affect the value of commercial real estate?
The Principle of Highest and Best Use is an important concept in commercial real estate appraisal and valuation. It states that the highest and best use of a property is the use that will bring the highest value to stakeholders. This means that when appraisers are determining the highest and best use of a property, they must not only examine its current use, but must also look into potential alternative uses. In regards to commercial real estate investing, the highest and best use typically means the use with the highest risk-adjusted returns.
To demonstrate how highest and best use can be used for a property with an existing structure, let’s say that an older building in a mid-sized metropolitan area is currently being used as an apartment building. If area cap rates are about 8%, we would estimate the building’s current value at $2,875,000. However, if the building were to be converted into a hotel, which is in high demand in the area, and a hotel chain were to sign a 10-year lease with rent that increases 3% annually, the property's value could increase to $6,131,250.
In this example, highest and best use has a significant effect on the value of the commercial real estate. By converting the property to a hotel, the investor/developer was able to increase the value of the property by over $3 million.
What are the benefits of highest and best use in commercial real estate?
The benefits of highest and best use in commercial real estate are that it can help to maximize the value of a property for stakeholders, as well as provide potential owners with specific benefits. It can also help to meet community development goals. When determining highest and best use, appraisers must consider not only the current use of a property, but also potential alternative uses. For example, when examining a vacant lot, an appraiser may analyze the profit margins for various classes of commercial real estate to determine which type of property would generate the most profit at sale. This helps to ensure that the highest and best use of the property is being utilized.
What are the risks associated with highest and best use in commercial real estate?
The risks associated with highest and best use in commercial real estate include the potential for a lower return on investment than expected, as well as the potential for a higher risk of loss than expected. Additionally, when determining highest and best use, appraisers may also consider other factors, such as community development goals, as well as specific benefits to potential owners, especially in the case of owner-occupied real estate.
When an appraiser attempts to determine the highest and best use of a property, they must not only examine its current use, but must also look into potential alternative uses. In regards to commercial real estate investing, the highest and best use typically means the use with the highest risk-adjusted returns. After examining the potential uses for a property that are both legal, physically possible, and financially feasible, an appraiser will rank them based on risk adjusted returns. In many cases, the options with the highest potential for returns will ultimately be too risky for investors, so appraisers often apply a discount rate based on risk to adjust a property’s IRR.
How can investors maximize the highest and best use of their commercial real estate investments?
Investors can maximize the highest and best use of their commercial real estate investments by examining potential uses for a property that are both legal, physically possible, and financially feasible. An appraiser can then rank these potential uses based on risk adjusted returns. In many cases, the options with the highest potential for returns will ultimately be too risky for investors, so appraisers often apply a discount rate based on risk to adjust a property’s IRR.
When determining the highest and best use of a property, appraisers may also consider other factors, such as community development goals, as well as specific benefits to potential owners, especially in the case of owner-occupied real estate.
In this article:
- What is the Principle of Highest and Best Use?
- The Four Tests to Determine Highest and Best Use
- Physically Possible
- Legally Permissible
- Financially Feasible
- Maximally Productive
- The Four Highest and Best Use Categories
- Applying Highest and Best Use to Vacant Land or New Construction
- Applying Highest and Best Use to Property With Existing Structures
- Questions? Fill out the form below to speak with a commercial real estate loan specialist.
- Related Questions
- Get Financing
